Thought I'd post a bit on my braided fuel feed line with pressure take off for left hand style weber fuel rails.
http://img.photobucket.com/albums/v74/sediciRich/cannon01025.jpgthis is -6 nitrile hose, with -6 fitting and 12mm banjo bolt holes. Made up by race parts, FYI the prices
2x banjo -6 12mm hole 21.20
1x -6 straight hose end 6.67
1x -6 90 swept hose end 15.50
1x -6 to -6 male female with 1/8 NPT pressure take off 14.61
3meter -6 nitrile hose 57.56
total inc vat £115.54 - yes these ally fitting are big money, but Fiat wanted some crazy money for the std hoses which they couldnt get in any decent time. This hose would be ok on a 16vt and pretty sure the 20vt rail has similar fittings. So if for some reason you want to know more just let me know. I also had a braided clutch hose made up too in -4.
rich
