More info to follow soon

Some people will do anything for a first post <img src="/forum/images/graemlins/wink.gif" alt="" />

Looking forward to hearing about it Beggers <img src="/forum/images/graemlins/laugh.gif" alt="" />

yeeeehaaawwwwwww

Yup, looking forward to hearing more news Beggars. <img src="/forum/images/graemlins/smile.gif" alt="" />

What's the point, he'll blow it up again within days anyway <img src="/forum/images/graemlins/tongue.gif" alt="" />

Nah, but seriously. Impressive project, will keep a close eye on this <img src="/forum/images/graemlins/wink.gif" alt="" />

Have you got photos of the bits you have bought - that piston gave me a hard on last time!

Just make sure it doesn't end up looking like this:
here <img src="/forum/images/graemlins/shocked.gif" alt="" /> <img src="/forum/images/graemlins/shocked.gif" alt="" /> <img src="/forum/images/graemlins/crazy.gif" alt="" />

ouch that must of hurt, any idea of rebuild cost

[color:"green"] Looking forward to seeing what you finally do to hit the big 400. Certainly is an impressive project [/color]

Best of luck to you beggers!

<img src="/forum/images/graemlins/shocked.gif" alt="" />

Thats very painful to look at.

Beggars can I see it this time, before you blow it up <img src="/forum/images/graemlins/shocked.gif" alt="" /> <img src="/forum/images/graemlins/wink.gif" alt="" />
Good luck mate

As it's a Ford Probe engine, I actually found it quite enjoyable to view <img src="/forum/images/graemlins/laugh.gif" alt="" />

Very <img src="/forum/images/graemlins/smirk.gif" alt="" /> James....but a good point!

thats the `best` ,most comprehensively blown engine i have ever saw <img src="/forum/images/graemlins/shocked.gif" alt="" />

Wow that engine is the worst I have seen!!!

Dave

lets dance Begbie :-)

i will follow this post with a special interest

regards

Begbie you have PM

You could repost your old photos at least <img src="/forum/images/graemlins/laugh.gif" alt="" />

have you finished it yet?

rich

Let's here it. Which turbo?


Silver

400 from a 16VT.... me thinks you have something special lined up.

Dont tell me you 'borrowed' a powerplant from the concorde at brooklands <img src="/forum/images/graemlins/smile.gif" alt="" />

So whats the plan dude?

Right the proposed spec is:

Forged CP Pistons with Higher Compression (8.0:1 to 8.5:1)
Forged Rods
New Crank and Shells
C&B Stage 2 cams
Group A Spesso Headgasket with Firerings
Supersprint Exhaust Manifold
GT3071 GT Turbo
3" Exhaust
Tripple Valve Springs (8000rpm limit)
3 angle seats
Port, Polish and Flowed
Paddle Clutch

All pictures taken here

Hmm... nice and shiny pistons there Begbie.

Good to see you have the essentials by the computer, ipod, memory cards, pistons, pint glass...

Right, not a lot to say, been a bit slack recently, but its time to get things going again.

Got an engine stand for xmas, so will be putting that to good use, head is being sent off tomorrow to Guy Croft to be worked on, probably be giving serdi a call this week to get them to bore the block for me, will be collecting my new crank fairly soon and also bought a new set of alloy wheels, which really wasnt necessary, but a bargain price anyway <img src="/forum/images/graemlins/laugh.gif" alt="" />

What are you doing for fueling and mapping m8?

From sound of things your spec won't be that different from mine except for the head work you are doing and obviously having 1 cylinder less <img src="/forum/images/graemlins/smile.gif" alt="" />

Not entirely sure yet Fergie. Im either going to go with my std ECU and get that re-mapped or get a stand-alone version of the same ECU but is fully tweakable and also plug 'n' play with my existing wiring loom, then probably go over to Mark Shead or Ahmed Bajoo to do the mapping for me

Right, finally started to get this rolling again. New engine stand bought for me by the girlfriend has been put to good use and the engine is now on it, although will have to come off again soon to flex-hone it <img src="/forum/images/graemlins/grin.gif" alt="" /> <img src="/forum/images/graemlins/laugh.gif" alt="" />

The engine is just about stripped now, just need to remove the balancer shafts (need to purchase an impact gun for it) then i will give Serdi a call to get them to flex-hone the block.

Head work should be commencing soon with Guy Croft, will call him this week to discuss what is going to be done and cost (Flowed head, 3 angles valve seats, tripple valve springs for 8000rpm, C&B stage 2 cams, possibly veriner pullies which will accept a 1" belt)

New crank has turned up and killed my arms carrying it for about a mile <img src="/forum/images/graemlins/laugh.gif" alt="" /> So this will be off soon with flywheel and clutch cover all to be balanced, so hopefully the engine can start to be put back together in april some time.

Bits still to get is the turbo, injectors, head gasket, ECU, total seal rings and im sure there is a few bits i have missed off.

Engine Bottom
Peekaboo
Clean Side
Top
Clean other side
New Crankshaft

Just thought i would let you know that the crank for the 16v turbo engine isnt forged like someone told me not so long ago.Its only a cast item.Nice pics aswell,best of luck with it. <img src="/forum/images/graemlins/smile.gif" alt="" />

Excellent work Begbie, I really can't wait to see this beast finished. <img src="/forum/images/graemlins/smirk.gif" alt="" /> <img src="/forum/images/graemlins/cool.gif" alt="" />