|
|
|
0 registered members (),
224
guests, and 2
spiders. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums48
Topics103,555
Posts1,168,759
Members1,579
| |
Most Online39,516
Apr 16th, 2026
|
|
|
Zender sideskirts
#542792
16/02/2008 00:10
16/02/2008 00:10
|
Topbuzz
Unregistered
|
Topbuzz
Unregistered
|
I've got hold of some genuine Zender sideskirts, on offering them up to the car they don't look like they will fit.
The edge fits into the slot running across the top but it's to high for the door. Any ideas would be great fully received but apart from altering the skirts I can't see how it would fit. Oh and my door hasn't dropped so thats not the problem.
Thanks
Phil
|
|
|
Re: Zender sideskirts
[Re: ]
#542812
16/02/2008 00:46
16/02/2008 00:46
|
frary
Unregistered
|
frary
Unregistered
|
phil
which edge fits into what slot?
|
|
|
Re: Zender sideskirts
[Re: ]
#542818
16/02/2008 00:56
16/02/2008 00:56
|
Topbuzz
Unregistered
|
Topbuzz
Unregistered
|
When I offer up the skirt I presume the top edge goes into the groove between the black lower body work and the painted bodywork. This should then run along just under the door edge and into the groove behind the front wheel.
|
|
|
Re: Zender sideskirts
[Re: ]
#542822
16/02/2008 01:02
16/02/2008 01:02
|
frary
Unregistered
|
frary
Unregistered
|
i yjouhht you meant that no it dosnt it goes just below here is a piccy http://img.photobucket.com/albums/v295/frary1755.freeserve.co.uk/Dsc00064.jpgit basicaly fits flush with the top of the sill i found its easiest to line up the front and the back bits that go round the end of the sills into the wheel arches. the photo is a bit decieving becouse the guy who did mine was so good there isnt a join where it meats the top of the sill
Last edited by frary; 16/02/2008 01:05.
|
|
|
Re: Zender sideskirts
[Re: ]
#542827
16/02/2008 01:12
16/02/2008 01:12
|
Topbuzz
Unregistered
|
Topbuzz
Unregistered
|
Thanks for your input, so that would leave a gap on mine because they have a triangle kind of tab that comes out perpendicular to the skirt. That fits in the groove fine but if it's lower then it will be held off. If it wasn't there they would fit keenly. Yours look like they wrap round the top and fit nicely.
|
|
|
Re: Zender sideskirts
[Re: ]
#548311
23/02/2008 22:43
23/02/2008 22:43
|
sprintsteve
Unregistered
|
sprintsteve
Unregistered
|
buzz , i had the same problem when fitting mine, the triangle grove fits nice and snug in the groove on the sill but doesnt sit in there ! it sits lower you will have to fill the gap in with tiger seal,i then got the skirts sprayed when i had fitted to the car.
to be honest considering they are genuine skirts the fit could have been a whole lot better.
|
|
|
Re: Zender sideskirts
[Re: ]
#548312
23/02/2008 22:45
23/02/2008 22:45
|
sprintsteve
Unregistered
|
sprintsteve
Unregistered
|
buzz , i had the same problem when fitting mine, the triangle grove fits nice and snug in the groove on the sill but doesnt sit in there ! it sits lower you will have to fill the gap in with tiger seal,i then got the skirts sprayed when i had fitted to the car.
to be honest considering they are genuine skirts the fit could have been a whole lot better.
|
|
|
Re: Zender sideskirts
[Re: ]
#587479
12/04/2008 12:29
12/04/2008 12:29
|
Topbuzz
Unregistered
|
Topbuzz
Unregistered
|
Only just looked back in here, thinking of tackling the skirt issue again today. Thanks for the reply Steve, that confirms the problem I found with mine.
|
|
|
|
|
|
|
