Fiat Coupe Forum
- Funded by the Club for the benefit of all owners
- Please consider joining the Club to help keep the Forum running
- Or you can choose to make a Donation
Fiat Coupe Club UK
join the club
Fiat Coupe Forum
 
» Club Members only
    Workshop manual


» Announced
    Posting images


» Related sites
    Main club site
    fiatcoupe.net

 
Who's Online Now
1 registered members (Edinburgh), 399 guests, and 2 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums48
Topics103,776
Posts1,170,742
Members1,683
Most Online39,516
Apr 15th, 2026
Top Posters(All Time)
barnacle 33,794
stan 32,123
Theresa 23,350
PeteP 22,315
bockers 21,083
Edinburgh 19,117
JimO 17,919
Nigel 17,387
Previous Thread
Next Thread
Print Thread
Page 3 of 3 1 2 3
Re: Brake kit now on the car! [Re: ] #550247
26/02/2008 20:56
26/02/2008 20:56

S
suba
Unregistered
suba
Unregistered
S



Ken - we can always have a look next time we meet up. smile

Re: Brake kit now on the car! [Re: ] #551706
28/02/2008 18:09
28/02/2008 18:09

P
plasticomnium
Unregistered
plasticomnium
Unregistered
P



Suba:
How would you compare the brake performance to standard?

Have you measured the distance you need from 60-0 before and after the upgrade?

Did you change the "pre-tension" of the spring of the rear brake balance thingy?

Have you noticed differences in "braking balance", i.e. does the car get light at the rear when braking or does it stay "as stable as standard" when braking heavily..

Thanks, Jochen

Last edited by plasticomnium; 28/02/2008 18:09.
Re: Brake kit now on the car! [Re: ] #552731
01/03/2008 00:29
01/03/2008 00:29

S
suba
Unregistered
suba
Unregistered
S



My brakes were not standard before the upgrade - I had pagid grooved discs and pagid pads. This setup is significantly better.

I've not measured the stopping distance - just gone by feel.

The brake bias remains unchanged - after I test the kit on a track I may add an adjustable bias valve to play around with the balance.

As standard I found the car got VERY light at the back on braking heavily - as in if you are not going in a straight line then it's spin time! The was originally why I started looking at upgrades. You have to remember that a high % of coops on the road will have a siezed bias valve which will reduce the braking on the rear anyway...

My old brake setup was fine for road use, but I wanted a bit more for use on track, so when the old discs and pads were due for replacement I went the whole hog.

Re: Brake kit now on the car! [Re: ] #570413
22/03/2008 18:50
22/03/2008 18:50

S
suba
Unregistered
suba
Unregistered
S



Some airfield testing was done this weekend - so about a minute or so bursts braking from 80 down to 20. Performace was good on the front, but not brutal - possibly they needed more use to get some heat into them.

The rears are fantastic. Handbrake turns with no problem what so ever. The standard brake bias is fine in that there is no rear lift on the brakes at all. smile

Re: Brake kit now on the car! [Re: ] #671851
01/09/2008 11:47
01/09/2008 11:47

S
suba
Unregistered
suba
Unregistered
S



Some proper testing was done at Donnington last weekend.

I did not install the bias valve, but did make sure that the standard compensator was working properly.

I was very impressed - the car stopped hard and consistently, but even more importantly there was no lift at the rear of the car at all under heavy braking.

Very good upgrade IMO. smile

Page 3 of 3 1 2 3

Powered by UBB.threads™ PHP Forum Software 7.7.1
(Release build 20190129)
PHP: 7.4.33 Page Time: 0.018s Queries: 15 (0.013s) Memory: 0.6098 MB (Peak: 0.6791 MB) Data Comp: Off Server Time: 2026-11-19 14:49:50 UTC