As those with this dumpvalve would know, the postion of its fitment scrapes on the battery tray. Was thinking of using a 45 degree silicone connector rather than the straight one.

Would an angled connection actually cause any negative effects on its performance? Anybody know off hand what the internal diameter of the connector is?

i use a 45 degree hose on mine well both baileys and my hks no problems

and the internal diameter of which part i have a baileys on my desk here

Oh great news then GT_SEB0

The diameter of the silicone hose...thats if you have the connector on your desk as well

the vacuum pipe i have connected to it well ive used 3 in the past 2.5mm fits very snug a pain to get on te manifold 3mm with clamps and 3.5mm with clmaps

Sorry i meant the main connector..not the small vacuum hose that connects to the top nipple..

Reason being, i want to get a 45 degree connector but not sure which size to get.

oooh you mean the bottom bell that goes on the main boost pipe it is a standard 1'' diameter

Yeap thats it. Will get a 1" ordered then. Thanks a bunch GT_SEB0. You can go to bed now

hell no i sleep during the day muwahaha