I am going to get a gt28rsr soon, i have been told i need a oil restrictor to restrict the oil pressure to the turbo (to stop oil pushing past the seals)
I have been on the atp site and afew others but i am not sure what size i need etc and what ends fit the engine block if i get a new oil feed pipe.

Any advise on this would be really appreciated as i am searching and not getting very far

Thanks Ash

I'm told it already has a restrictor, the ATP one anyway?

Its already fitted to a 20vt as i am buying it 2nd hand. But i am not sure what to do with the oil feed still. I have seen this on ebay- http://cgi.ebay.co.uk/Nissan-Pulsar...QQ_trksidZp1638.m118.l1247QQcmdZViewItem

I am not sure if it will fit the block and turbo.

my gt28r was fitted with the standard oil feed pipe, just bent it very slightly to fit.

though it may be worth fitting an in line oil filter on the feed pipe (i havent... yet, but i want to)

What bolt did you use to fit the standard feed pipe. I thought that the oil would have already been filtered by the oil filter as it gets its feed from the oil way going up the engine.

Thanks Ash