Both my sets are 7.5x17 with an ET25 and PCD 98. I run 225x45x17's but have trimmed my rear arches a little to stop any rubbing. I also run the bigger Alfa GT calipers and have no clearance issues up front.
You can get what ever ET you like within reason. Lowering the coupe will be a suck it and see. I'm on lowered Eibachs just now but i don't know how much lower you could go at the front as my car is very low. The rear of miine could come down a good bit but that's because my car is stripped.
Last edited by sparco; 09/06/200808:55.
Re: Team dynamics pro race 1.2 info required
[Re: ]
#627326 09/06/200811:1409/06/200811:14
similar to sparco, 7.5X17 ET25 PCD98, on LOW hormann springs all round, with 215X45/17 (not the recommended size btw) JUST rubbing at the back when fully loaded, on the front it's touching a bit on the one wheel arch on full lock, but that is due to lousy fitting of the inner arch (easy to fix, hence not fixed...)
V.
Re: Team dynamics pro race 1.2 info required
[Re: ]
#627788 09/06/200821:5809/06/200821:58
Im running these and 2 wheels have cracked/fractured. Welformed has had one of his crack/fracture also, so that is something to consider although there are other users out there who have had no problems with theirs so far.