2 registered members (Edinburgh, 1 invisible),
163
guests, and 2
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums69
Topics113,611
Posts1,341,247
Members1,804
|
Most Online731 Jan 14th, 2020
|
|
|
just fitted gtech
#633703
21/06/2008 18:01
21/06/2008 18:01
|
doug20vt
Unregistered
|
doug20vt
Unregistered
|
hi, just fitted a gtec 1 chip, car is totally standard, took it out for a drive and it doesnt feel any faster, does the gtec take time to bed in or should i notice a big difference straight away, the chip that was in it originally didnt have any markings on it, had a yellow sticky bit of paper on it with the numbers 357896 on it and a small pen mark, any ideas anyone
|
|
|
Re: just fitted gtech
[Re: ]
#633752
21/06/2008 19:20
21/06/2008 19:20
|
symonh2000
Unregistered
|
symonh2000
Unregistered
|
Have you got a boost gauge? If so is the boost reading any higher?
You may have a problem with a stuck closed EBV which is leaving you on base boost. If you haven't got a gauge you might not know about it apart from the car being slower.
|
|
|
Re: just fitted gtech
[Re: ]
#633753
21/06/2008 19:21
21/06/2008 19:21
|
GrahamL
Unregistered
|
GrahamL
Unregistered
|
The chip you had with the sticker and printed number will be the standard fiat/bosch chip. It's quite common for them to be labelled in that way.
You should defintely notice an immediate difference, especially in 2nd gear where you'll be getting around 50% more boost.
Without having a boost gauge to see exactly what it was doing before and after fitting the new chip it's hard to say what the problem could be.
First thing to check would be the throttle cable, maybe it's loose and so you're not getting full throttle/full boost in any gear... with engine off get someone to floor the throttle and then check under the bonnet for any play in the cable, if there is then tighten it up.
|
|
|
Re: just fitted gtech
[Re: ]
#633769
21/06/2008 19:40
21/06/2008 19:40
|
doug20vt
Unregistered
|
doug20vt
Unregistered
|
hi, just checked the throttle cable, it seems to be tight, its seems to be pull ok cleanly through the rev range and i cleaned the ebv a couple of months ago, going to a rolling road day in aberdeen in a couple of weeks time, just wonder if its worth getting a uprated ebv see if that makes any difference
|
|
|
Re: just fitted gtech
[Re: ]
#633770
21/06/2008 19:50
21/06/2008 19:50
|
eldinho
Unregistered
|
eldinho
Unregistered
|
i would get a boost gauge first as recommended
|
|
|
Re: just fitted gtech
[Re: ]
#633804
21/06/2008 21:02
21/06/2008 21:02
|
MattW
Unregistered
|
MattW
Unregistered
|
As above, boost gauge, and either an uprated EBV... or a PRV if you dont mind the added risk and want the ultimate spool up
|
|
|
Re: just fitted gtech
[Re: ]
#633821
21/06/2008 21:47
21/06/2008 21:47
|
doug20vt
Unregistered
|
doug20vt
Unregistered
|
think i will def have to get a boost gauge and an uprated ebv, heard the gm one's are good ones, going to stick with a ebv for safety's sake, getting the car rolling roaded in a couple of weeks so hopefully any probs will show up then
|
|
|
|