pro race i think would be lighter but only 17's and not sure if they still make them now?

Good point Highwayman!!! I didn't actually notice that until you metioned it there!!!

I miss the photos in posts!!!!

I noticed it straight away Begbie. Go on tell us the secret!

I cant, been told im not allowed to do it anymore

What we have so far is:

PCD 98

17" Compomotive Mo's
17" Azev C,E,U and LS
17" Team Dynamics Pro Race 1.2 ET25

18" Azev C,E,M,U,FS and LS
18" Azev C
18" Azev E
18" Dare V5


PCD 100 Wobbly bolts required

17" Dare V1
18" Wolfrace Urban Racers
18" TSW Ribs

PCD 100 Wobbly bolts and spacers

18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers
18" OZ Superleggera 7mm Spacers

I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.

Team Dynamics Pro Race 1 fit without spacers or wobble bolts, 7x17in, 17.6lbs

Begbie

Don't the Superleggera come in 4x98? My OZ Records were a 4x98 fit (at least as far as I know - Keith @ Auto-Integrale fitted them for me)

For the weights (but not fitment) check this site: Wheels Weights page

For reference, the standard 20 vt coop wheel - according to what people here had weighed it - is 21.5 lbs / 9.77 kgs

Also the wheelmania Jade in 18, straight on i think

One that same site, these would look great, if only these would fit:

Racing Harts

17" Momo Fighters fit, but with spacers and wobbly bolts

Enfant as far as im aware, OZ never have made any wheels in the 4 x 98pcd always 4 x 100.

Graham if your adding wheels with spacers you can stick Oz Superleggera's down in 17" with wobble bolts and 7mm + spacers

Begbie, I will do mate. Just waiting for a few more wheels before I update.

There must be more that fits? I`m sure there is a lot more members on here with wheels different to standard and what has already been put down

What tire measurements are you using with 17" and 18" wheels?

Thanks

I think it's very important for posters to state which model coupe they fit, as there is the problem with caliper clearance.

Hamster

Good point Hamster. The details I`m after is for a 20VT. Looks like this thread has already died as no one seems to be adding anything

It's doing a lot better than my thread "List of Tyres." I am so surprised that so many people have so little to say on two really useful topics.

Considering most user's preoccupation with post counts, I thought these two topics would have gone double platinum with the amount of posts.

The replies that say "I think ..... will fit" or the, "I don't know about that, but blah blah...... etc etc" are particularly useless. I'm not going to shell out the best part of a grand or more on a wheel/tyre combination unless I am 100% certain of the fitment.

I don't want to travel all around the country to try rims on, or take the advice of a fitter from the local job centre over the phone just to turn up at their outlet or mail order them and be angrily disappointed.

I thought we were all trying to build up some kind of knowledge database for the benefit of existing and potential members - perhaps I'm wrong, I hope so.

Hamster

And I didn't even mention post hijacking!

LOL You got that off your chest now? You feel better

I contacted Azev in Germany and got this reply about what wheels will fit a 20VT with 98 pcd.

Type Azev A/C/U/AS/LS 8 x 17
Type Azev C/E/M/U/AS/FS/LS 8,5 x 18

Thats is the reply I got.

The German forum has pics of a number of wheels on the Coupe. However, you would need to translate the info to see what they had done to get them to fit.

If you are interested, this is the site:
http://www.fiatcoupe-freunde.de/
Have a look under Owners

(I think Spurplatte means spacer)

There is one on ebay at the moment with 17" 1000+ miglia alloys so I guess these fit too click

Is an 8.5 X 18 ok to use on the coupe, I would have thought it was a little wide, especially as you'd need a wide tyre to strech over the rim ?

You really dont want to go too wide a tyre on the coupe or it starts to suffer from tramlining and wandering.

Jimbo,
That information I got was from Azev themselves in Germany. All I have done is copy their response. I really don`t know what is good or not anymore.
Thought this thread might be a good idea. How wrong can someone be. Still getting the same problems.

Oh well I tried

I just bought Team Dynamics Pro Race 1.2 17" ET25 they are straight fit to the 20vt without spacer, and a weight of 7.9 kg!

<< Team Dynamics Pro Race 1.2 >>

The best looking wheels for a coupe in my opinion are 17" Kahn RS-R's.

interesting Yogisdk, as i was emailed saying they would not fit the coupe....

Well depends on what size you asked for, as I can read from the catalog i received with the wheels, the 7x17" model is identical to the ProRace 1, which fits straight...There was one other model identical but cant remember...If you were looking for other sizes then they wont fit straight i guess

I just checked the online catalog from the german site:

"verwendungsbereich 7,0x17 und 8,0x17 identisch mit PRO RACE 1 in Zuordnungsliste" which translates to

"operating range 7,0x17 and 8,0x17 identically to PRO RACE 1 in zuordnungsliste"

No i wonder what is that last word I guess is the application list, like if it says the coupe can fit pro race 1 7,0x17 then can fit these ones...

Hi Yogisdk
Is is a nice wheel, what colour did you buy, is ET25 too much? Can we see some pictures?
I have been trying to buy the same wheels (pro-race 1 or 1.2 anthracite if possible) for a few months, but no outlet will order them for me, it is either no stock or they won't fit 20vt . Where did you buy yours from ?