Begbie. I got to remove yours. Yours is a 16V. didn't realise that <img src="/forum/images/graemlins/frown.gif" alt="" />

Graham, those 18" wheels on Alleystews picture arent Dare V5's ?
These are Darve V5's

18" Oxigin 3, no spacers just the correct offset and PCD...

symon

Your coupe is a 16v mate. You don't have any problems with clearance,hence the reason I've only been listing for 20VT's

We've had so many new members ask about wheels for the Coupe 20VT because of the Brembo clearance. Thats why I decided to start this thread <img src="/forum/images/graemlins/wink.gif" alt="" />

Begbie has Brembos fitted to his 16VT.

Thanks Jimbo. Correcting now. Thought they didn't look right <img src="/forum/images/graemlins/grin.gif" alt="" />

<img src="/forum/images/graemlins/laugh.gif" alt="" /> <img src="/forum/images/graemlins/laugh.gif" alt="" />

Does anyone have Dare Tettsutx on his coop? If there is someone some pics would be nice.....from the picture taken here http://swtyres.co.uk/wheels/dare/tettsutx, I think it would be nice on coop

Sorry, I didn't see the bit about this thread being for the 20 valvers... Still much of the wheel fitment is the same, like PCD.

As MattB said I have brembo's

begbie, your back in mate <img src="/forum/images/graemlins/wink.gif" alt="" />

When you getting the coupe resprayed?

Once the engine is rebuilt and running <img src="/forum/images/graemlins/wink.gif" alt="" />

So that will be next summer then <img src="/forum/images/graemlins/laugh.gif" alt="" />

This needs a BUMP. Still require pics of wheels are peeps Coupe.

Also. How do I bring the list to the end of the page including picture links without having to redo the lot?

Err, mine are non-standard, shown in pic, not sure what they are.
The guys at the south east meet said there was no spacers.
Never taken 'em off...yet...

I have 17” Tsw reflex pcd 4x98 with no spacers.
It’s a very tight fit and they probably cloud do with a 5mm spacer on there.

Ok just measured the clearance on the rims and its 2.5mm.
I have had them on there for over a year now with no probs.

Bernie send us a pic with them on your car and I'll add them to the list.

Come on people still got loads that needs pics

There being refurb at the mo (in inc black) so I will post then.

Err <img src="/forum/images/graemlins/confused.gif" alt="" /> how do you post pics as well as I have never done this

ok so i under stand the pcd but what is the offset is that the distance from the hub to the out side of wheel plus what is the minimum off set. plus ive noticed most alloys are 100 pcd so whats the big problem with wobblys and what are the effects

What is the offset... Hmmmm ask Cosmograph <img src="/forum/images/graemlins/laugh.gif" alt="" />

Wobbly Bolts.... I was told by Rog from Powerfiat not to fit spacers or wobbly bolts as in the past their has been accidents with them. I think Carlt had a crashed Coupe were a wheel came off <img src="/forum/images/graemlins/shocked.gif" alt="" />
However a large number of members do use wobbly bolts and
spacers with no problems. Your choice <img src="/forum/images/graemlins/smile.gif" alt="" />

Does anyone have any info on these wheels

Clicky 1

Clicky 2

I think they look <img src="/forum/images/graemlins/love.gif" alt="" /> fantastic <img src="/forum/images/graemlins/love.gif" alt="" /> on thew coupe.

Looked at a few porche replica wheels but they all seem a little too wide, does anyone know of a narrow version of a prche replica wheel in an 18" ?

given up already on the group buy mate <img src="/forum/images/graemlins/smile.gif" alt="" /> hold fire <img src="/forum/images/graemlins/wink.gif" alt="" /> for the porka reps to look good they need to be 5 stud.

I hadn't given up on the group buy, everyone else had though <img src="/forum/images/graemlins/frown.gif" alt="" />

Im still looking to find a nice wheel though <img src="/forum/images/graemlins/smile.gif" alt="" />

Found these that are the right width, just need to fing out about 5 stud to 4 stud conversion.

H&R do a 4x98 to 5x130 hub convertor.

I have some Porsche Cup 2 wheels on my old school VW Super Beetle cabrio <img src="/forum/images/graemlins/smile.gif" alt="" /> (also has Porsche 944 brakes!!)

All Porsche 911/944/968 front wheels will be the right offset more or less - they are ET53 or ET55 as standard and the usual convertors are 25mm AFAIK.

John

Thanks John, I've just been looking at the H&R hub adaptors from H&R at Performance Alloys they are the ones for the job but the price seems a little hight at £170 per pair !!

they have a bold statement to the alloys don't they, "all wheel fitments are available". try them out see what coop fitments they have <img src="/forum/images/graemlins/smile.gif" alt="" />

also i would still be a bit iffy having 20-25mm spacers on the car. thats alot of metal on the hub

I'm running a set of Postert 17x8". Can't find their site now though?

http://sfk.ibk.se/depa/showfile.php?carpic_no=833&type=picture
http://sfk.ibk.se/depa/showfile.php?carpic_no=525&type=picture

They are 4x98mm but need 8mm spacers. <img src="/forum/images/graemlins/wink.gif" alt="" />

You can get the Porsche carrera Cup III alloy(the ones you're looking at) replicas in 5x100 - you sometimes see them on golfs and new shape beetles. Not a very good replica though. 5x100 still means you'd need the Alfa hub conversion which is not cheap either.

I think Eibach also do adapters I believe. You can sometimes pick up the adapters from german ebay for a lot less as well.

The adapters bolt into the hub, and then the wheel bolts into the adapter so they are reasonably safe.

i'm with you on those porky wheels if it can be sorted. am trying to find out from these people if they can help.

An update on the Porsche wheels, Elite can supply the spacers for £250 for the 4, genuine Porsche wheels in a 7.5 x 18" for £130 each and Toyo tyres.

The whole package comes in at £1320 !

I just need to make sure these will fit, I cant see why not, they are the correct offset and they are designed to go on big caliper porsches, anyone know of any reason why they wont fit ?