Assembly the PRV from Armval

Fiat Coupe Club UK

Fiat Coupe Forum

» Club Members only
Workshop manual

» Announced
Posting images

» Related sites
Main club site
fiatcoupe.net

Top Posters(All Time)

barnacle 33,794

stan 32,123

Theresa 23,349

PeteP 22,314

bockers 21,083

JimO 17,919

Nigel 17,387

Print Thread

Assembly the PRV from Armval #70123 11/03/2006 02:26 11/03/2006 02:26
Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden Freddan72 OP Competition Level
Freddan72 OP Competition Level Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden	I unluckily <img src="/forum/images/graemlins/frown.gif" alt="" /> unscrew the PRV and ended up with two pieces, one spring and a steel ball. I just wonder were do I put the steel ball? Should I put it in the piece with the long straight connector and then the spring? Regards Freddan Coupé Fiat 20V Turbo Plus 1999, T19 Mitsubishi turbo https://youtu.be/O9qrLj3Ap00 Now FCP Stage3!

Re: Assembly the PRV from Armval #70124 11/03/2006 02:40 11/03/2006 02:40
A Anonymous Unregistered
Anonymous Unregistered A	PM Cosmograph, as he supplies these and should know <img src="/forum/images/graemlins/wink.gif" alt="" />. Phil

Re: Assembly the PRV from Armval #70125 11/03/2006 02:58 11/03/2006 02:58
Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden Freddan72 OP Competition Level
Freddan72 OP Competition Level Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden	Done that <img src="/forum/images/graemlins/wink.gif" alt="" /> Coupé Fiat 20V Turbo Plus 1999, T19 Mitsubishi turbo https://youtu.be/O9qrLj3Ap00 Now FCP Stage3!

Re: Assembly the PRV from Armval #70126 11/03/2006 04:56 11/03/2006 04:56
A Anonymous Unregistered
Anonymous Unregistered A	yeah i think u just put the ball back in then the spring job done but if iam wrong Cosmo will sort me out <img src="/forum/images/graemlins/shocked.gif" alt="" />

Re: Assembly the PRV from Armval #70127 11/03/2006 12:34 11/03/2006 12:34
Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden Freddan72 OP Competition Level
Freddan72 OP Competition Level Joined: Dec 2005 Posts: 2,194 Göteborg, Sweden	I just received an answer from Cosmograph. "Put the ball in first to the straight connector, then the spring , then the elbow connector screwed into the main body." Good to know for all you out there how have made the same mistake <img src="/forum/images/graemlins/smile.gif" alt="" /> Coupé Fiat 20V Turbo Plus 1999, T19 Mitsubishi turbo https://youtu.be/O9qrLj3Ap00 Now FCP Stage3!