Hello

I have chanced the turbine housing from 10.5 ( evo 9 ) to 11.5 model, and with that housing, I get bigger wastegate and wastegate holes. its made in taiwan I believe, and I just found that, when searching a second housing, for me to
modify. I believe, that this housing wont need any mods

Tomorrow is a judgement day ...

a Start up .

please let everything be ok

Congrats on the startup

Can we get some more recent pics of the turbo setup you are using?

hello.

its still the same evo 9 turbo, just with bigger turbine side housing, and wastegate. anyway, here is one:

http://s224.photobucket.com/albums/dd72/jq4tm/?action=view&current=115turbinehousing.jpg

I will let you know how the VIS manifold works, when I get all the rest done. there is still some little things to do.

but car is on the road already !

What I think Saint is trying to say is that you should add an obscene amount of photos. Go nuts with the camera

Clutch is slipping and you are loosing brake fluid I'd say you clutch slave cylinder is leaking over the bell housing.

No brake fluid cant get in the engine, unless is went through the servo vacuum pipe very very unlikely. Clean your idle valve with decarboniser.

I was thinking that too, but it has stopped ..
it wont leak at the mo..

but slipping is not. well, glad I have new clutch waiting

already. will check that cylinder too, if it needs replacing.

Looks quite quick, will have do to a video of mine for comparison. Exhaust sound weird though, what is it?

weard ?

yes I know, its because of my phone, and screamer pipe

20kg of weight saving is very much. Good work. Have you tested it before and after? Big difference?

Finland won this year but you wait and see. Next year we will win.

You can feel it when you drive. thats for sure.

Big difference, the responding is much better.
and a lot lighter for handling.

havent tested on RR yet, I´m still trying to get some
time to chance the clutch.

Freddan ; you won the football game, thats enough for you

Where did you get your manifold from, or is it home made? I'm Interested in going the sane route as you for my project

DINK is alive he has updated his website and he was busy....so he said......

Thanks!

I saw the video where you tested 3rd and 4th gear. What holder do you use for the AEM Uego? Or do you use tape?

double sided tape is used.