http://www.youtube.com/watch?v=9Z0TxpOPoe8

http://www.youtube.com/watch?v=55wfkBoj5_0

it tests only 'til 6k rpm cause we'we some wastegate problems (38mm ext was a bit small and over 6xxx rpm boost raise up over any limit...s##t), soon the final tune-up with a 44mm. In this condition it makes 480-490 CV and 680-698 Nm of torque in vary rr, with pump gas and stock ecu.
Enjoy!

So is your coop 4 wheel drive???
It loks on the video like its rear wheel drive??
is CV same unit as bhp???
698 nm is what....?? approx 525 ft lb torque??

What are your engine specs??

Nick

nm to ftlb is : 1.335

so that 698nm : 1.335 = 522ft lb

I would like to see the RR-paper, not just the video..

yer a print out would be cool!

I've already wrote that it's in testing and we've not run over 6k rpm (in engine test room we're run 7500),I think quarter mile is better than....paper.
See you soon for the results.

yes, a street (il)legal awd
Engine is a 16v fully built no stroker (wossner pistons,arrow rods,head gasket,custom made cams and exhaust manifold (classic supersprint-like design),precision sc61,70mm exhaust + 44mm tial (is a work in progress,in this tests we've run a bit small 38mm) with scream pipe,a big bar/plate ic w 3" piping,walbro 255,RC 750cc and torquemaster fuel reg,82mm Ku engineering throttle body with modified delta integrale intake manifold,twin disk clutch and light steel flywheel,a 19 row oil cooler...what else...a bmc filter,tial bov,reg cams pulleys,and we've eliminated all was unuseful (a/c,balance shafts,change the battery with a lighter one,ecc)

It could be approx. all.....;)
all the rest is stock.

Impressive!!
There was me happy with my 306 bhp...
You've completely burst my bubble now!!!

Nick

How much boost are you running/ planning to run?

good stuff, do you have any other pictures, was the ecu remapped?

it has 2 maps, one @ 1,7-1,5 bar and the other at about 2,2-1,8 bar
the ecu was obviously remapped!

What compression ratio are you running with that boost and what head bolts?

beg...I can only say that...I don't know!
My tuner decided because I haven't the tech knowledge to do by myself...
For the head bolts,I remember that it's ARP but I don't remember if it's 10 or 12...
at work finished (totally),he promise me that I'll receive all the infos about things I don't know

http://i287.photobucket.com/albums/ll129/Cola16vTurboAWD/Foto1387.jpg

http://i287.photobucket.com/albums/ll129/Cola16vTurboAWD/Foto1334.jpg

http://i287.photobucket.com/albums/ll129/Cola16vTurboAWD/Foto1391.jpg

http://i287.photobucket.com/albums/ll129/Cola16vTurboAWD/Foto1427.jpg


some pics

Holy crap, that is one great installation

At what rpm do you get full boost?

seems to get 1bar / 4000rpm
2bar / 4500rpm

there was a picture of the RR-paper

in car start boost about 3700 rpm and hit 2,2 at 4300 rpm, max torque at 4800 rpm but with big turbos like this,doesn't matter if made torque at 5k...because simply over 4k rpm is the hell...(made 380 CV at 4500 rpm!)
No BB!

eheheheh! it's the paper of the engine test room of my engine.....(made 531 CV and 64 kgm) the paper of the RR comes when I'll finished (when can run all the rpm without problems)

dear friend Danilo.
Very nice street coupè....
I hope to see you at some drag race as soon as possible.
Do you know weight of your car now?
bye.

weight is also a very good questions....I want to measure it soon....I hope it's not over 1400 kg....

Guys... how are you?
It's been a long time since I wrote here...

I'm so happy to have good news...

I've been living in London for 3 months and I'm looking for bring my lovely Coupé here

I need to know something more about the things I have to do, like mot and registration. I'm also looking for an insurance, just to have an idea of the expenses...so I've contacted Sarah.

I can't wait

Get in contact with the dvla
https://www.gov.uk/contact-the-dvla
They can help you.

Thank you... Just sent an e-mail now

Hi Cola,

These movies aren't working.

I know, I removed it years ago 'cause it was only a couple of RR videos.