Fitting bigger pistons

Print Thread

Fitting bigger pistons #996646 08/03/2010 14:01 08/03/2010 14:01
Joined: Jan 2006 Posts: 996 Mitcham/Croydon Coupe_Don OP Enjoying the ride
Coupe_Don OP Enjoying the ride Joined: Jan 2006 Posts: 996 Mitcham/Croydon	Hi all, just wondering what the maximum gap/clearance should be from cold bteween the bore and piston. Is there a rule to this e.g less than 1mm. Also when sending the block away for re-bore is it a good idea to send the pistons too so everything can be checked? Cheers John

Re: Fitting bigger pistons [Re: Coupe_Don] #996647 08/03/2010 14:05 08/03/2010 14:05
Joined: Dec 2005 Posts: 10,728 N.E Scotland mattB Club member 6
mattB Club member 6 I AM a Coop Joined: Dec 2005 Posts: 10,728 N.E Scotland	The pistons will come with a dimension for the required clearance and bore size. Death-rattle-tastic

Hop To