Forums69
Topics113,599
Posts1,341,106
Members1,802
|
Most Online731 Jan 14th, 2020
|
|
|
Help with blitz sbc I'd boost settings !!!!
#1383760
09/10/2012 19:43
09/10/2012 19:43
|
ianmunro
Unregistered
|
ianmunro
Unregistered
|
Hi I have a blitz sbc Id and can anyone tell me what the gain and set should be ? I want to set it with three channels on 1.1 bar , 1.2 bar and 1.3 bar but have no idea what the gain should be set to and the set should be set to ? Many thanks ian
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383846
09/10/2012 23:07
09/10/2012 23:07
|
ianmunro
Unregistered
|
ianmunro
Unregistered
|
That's great what about the set ? Any ideas as I'm lost and can't find anything online .
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383893
10/10/2012 08:16
10/10/2012 08:16
|
Joined: Dec 2005
Posts: 4,831 Haslemere, Surrey
Mark_S
Forum is my job
|
Forum is my job
Joined: Dec 2005
Posts: 4,831
Haslemere, Surrey
|
That's great what about the set ? Any ideas as I'm lost and can't find anything online . Not sure what you are asking here?
997 C4S
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383945
10/10/2012 13:12
10/10/2012 13:12
|
ianmunro
Unregistered
|
ianmunro
Unregistered
|
On my blitz control to set the boost there are 2 settings the first is called gain which I now understand what it does and what to set to and the second is called 'set' this is the number that goes from 1 to 100 but controls the boost and I don't know what to set to ! I want to set my car on the three settings of 1.1, 1.2 and 1.3 bar ?
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383952
10/10/2012 13:26
10/10/2012 13:26
|
Joined: Dec 2005
Posts: 4,831 Haslemere, Surrey
Mark_S
Forum is my job
|
Forum is my job
Joined: Dec 2005
Posts: 4,831
Haslemere, Surrey
|
Okay now I get it.
Basically you can do this and fine tune it by trial and error. I think my settings are as follows:
30 = 1.1bar 40 = 1.2bar 50 = 1.3bar 60 = 1.4bar
All approximate and depends on the weather (may also depend on your set up)
I'd start low at a "set" value of 30 - boot it and see what max value you get, then go on up as far as you want / dare on the fdifferent channels. Enjoy!
997 C4S
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383953
10/10/2012 13:31
10/10/2012 13:31
|
Joined: Jun 2010
Posts: 566 Guildford, Surrey, UK
Punto16VT
Enjoying the ride
|
Enjoying the ride
Joined: Jun 2010
Posts: 566
Guildford, Surrey, UK
|
Manual for Blitz Dual SBC Spec. S/R is here: www.blitzpowerusa.com/techsupport/pdf/dualsbc_specs-r.pdfSet value 1-100 is a 'percentage', so start at a lowish value (say 25) and increase until you know the value for your desired peak boost, then calculate for each of the 4 settings. P is an added percentage for a time.
Sprinty Coupe 20VT6 1949 White Abarth Punto Grande SS Stromboli Grey Alfa 159 Ti Abarth 695 Rivale
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1383985
10/10/2012 16:54
10/10/2012 16:54
|
ianmunro
Unregistered
|
ianmunro
Unregistered
|
Thanks for the info and replys guy really appreciate it All the best ian
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1384182
11/10/2012 19:30
11/10/2012 19:30
|
Joined: Aug 2000
Posts: 9,729 Zele, Belgium
Kayjey
Club Member #10
|
Club Member #10
Je suis un Coupé
Joined: Aug 2000
Posts: 9,729
Zele, Belgium
|
The gain should improve spool up, but can also cause overboost peaks.
Best way to set it up is motorway first, gain to 0 and set your boost to what it needs to be to get what you want. Trial and error, every car is different. Start low. Use high gears to test and full throttle to find where it will get to.
After that, set gain in a lower gear (increase in steps of 5 untill it starts overboosting). You can also do this in higher gears, but then you have to start around the revs ifpeak boost, keep boost around 0.8 bar andthen at those revs floor it. It will shoot up quickly. Set to a value where it will not cause overboost. Verify at lower revs.
- Kayjey -
|
|
|
Re: Help with blitz sbc I'd boost settings !!!!
[Re: ]
#1384205
11/10/2012 21:15
11/10/2012 21:15
|
ianmunro
Unregistered
|
ianmunro
Unregistered
|
Thanks kayjey
|
|
|
|