I've tried refurbishing the B pillars, I used an etching primer and have tried a matt finish as the satin contrasted too much it looks good, however the top coat is still soft, marks every time I touch it. It's supposed to take 24hrs to fully harden but even after 72 it's still marking. Would a lacquer help?
Re: Top coat won't harden
[Re: respace]
#1642769 20/07/202020:2620/07/202020:26
Lacquer won't help, what kind of topcoat did you use, should have been dry to touch in half an hour, unless you used some kind of household enamel paint, like Hammerite or that Halfords stuff. If it's still soft after 72hours, best taking it off and starting again,with proper 2 pack paint.
Re: Top coat won't harden
[Re: respace]
#1642797 22/07/202010:0822/07/202010:08
Thanks for the reply, I think it was a brand called Auto Extreme, I got it from somewhere in Ireland. Seemed really nice stuff to use, good quality spray/coverage but has stayed soft ie finger nail scratch. Fear it's back to square one as suggested.
Re: Top coat won't harden
[Re: respace]
#1642806 22/07/202013:4322/07/202013:43
Thanks Brian, I took your advice first time and did just that, I thought the satin looked a little shiny when I put it against the lock and the seals so I thought I'd try a matt. The Halfrauds stuff was fine. Should have just painted the locks!
Re: Top coat won't harden
[Re: respace]
#1642819 22/07/202018:5622/07/202018:56