I`m after a bit of symmetry for the back of my coop. I can`t decide which would be best.

1) The reversing light replaced with a rear fog light.

2) The rear fog replaced with a reversing light and a red LED bulb in for the fog light.

3) Spray both bottom lenses with red tinting spray.

I`m assuming the first 2 options will be possible as i wouldn`t have thought there would be a big difference in the light fittings,just possibly the connector plugs would be different. Any opinions?

Baz

so your trying to make it look like this http://i53.photobucket.com/albums/g45/cowboykarl/patsphotos005-1.jpg

Yeah something like that. Are the lights just a straight swap or will i have to make up new connectors for them .

Baz

I have been thinking of something similer
having 2 reversing lights and changing the rectangular reflectors at the bottom of the bumper to fog lights.

You'll still need reflectors though.

Cowboy, where's your reverse light?

I've seen a German Coupé fitted with 4 red rear lights.
He resolved the 'reverse light' issue by mounting the bumper-units from the FIAT barchetta

You could have a thin strip reverse light either side of the number plate?

i got reversing light in my reversing censours but dont no if it will pass mot like that but will no by nine oclock tomorow and they are a straight swap

You may have an issue mate, but you never know

yeh but got other light to fit just incause five min job

You`ll be ok as reversing lights aren`t in the test .

You dont need a reverse light for an MOT. I havent had one for 3 years. The other thing Im missing is a fog light. But luckily the MOT tester is ok

thanks lads ill sleep tonight

I was actually thinking of replacing all my bulbs with LED ones too,especially the reversing one as i find it`s just not bright enough .

Baz

Found an image of the Coupé with a set of barchetta lights fitted.
not the best quality pic

well you were right got mot this morning and no reverse lights needed,o and it past nothing wroung with the car,nice to no

I've run with 2 rear fogs for nearly a year now, no probs with MOT passing
It looks good when they are wired up and makes the car more vissible in the fog.
You will need to drill 2 new holes in each light mounting to fit them though.

Two Fog Lights

Thing it evens up the rear end.

If Im reversing into the drive at night I just put the fog lights on, more than enough light

Did you put your lights in upside-down deliberately Jimbo ?

I think i`m gonna try the 2 reversing lenses first with LED bulbs (1 red and 1 white) as i need a good bright light for reversing into my drive as it`s quite narrow and my security light doesn`t light up the bits i need to watch out for .

Baz